← back to control center › Ship-In Division

📦 Ship-In Transmission Division

$960K today → $2.1M ceiling. Most of the gap is HERE.

In queue

2 inbound · 1 building

This month revenue

$8,400

3 builds shipped

Avg ticket

$2,800

+ ~$1,200 freight

GTECH flusher upsell

0 / 3

none bought tool yet — opportunity

📋 Digital Waiver (the gate)

Customer fills this out BEFORE shipping a unit in. Signature required. Saved with their ticket forever.

MDC CONSOLIDATED — SHIP-IN TRANSMISSION SERVICE AGREEMENT

Your name

Phone

VIN

Year / Make / Model

Trans / Code (if known)

Your acknowledgements

I will flush my transmission cooler lines hot until clean before installing the rebuilt unit.
Cold "chemical + air blow" is NOT a flush. Contamination from the old cooler lines is the #1 reason rebuilt transmissions fail early.

I will replace or properly flush the cooler section of my radiator.
The cooler in your radiator can hide debris that destroys the new unit in days.

I will use the correct fluid specified for my vehicle (auto-filled by VIN above).
Wrong fluid (e.g. Mercon V instead of Mercon LV) burns clutches in weeks. Fluid spec will be printed on your shipping packet.

I will run a TCM relearn / adaptive reset if applicable to my vehicle.
Without relearn, the trans will shift roughly until adaptives rebuild — looks like a defect, isn't.

I have watched the install + flush video MDC sends with the unit.
Required. Short. Saves comebacks. Link emailed after this form.

I understand failure to do any of the above voids the rebuild warranty.
Same standard Honda, Ford, GM force on their dealerships. Not gouging — protecting the work.

🔥 Hot-fluid flusher requirement

Honda, GM, and Ford require their dealerships to own a hot-fluid flusher before warranty work. We do the same.

I already own a hot-fluid flusher (will provide make + model). Send a photo with your unit.

I want to BUY a GTECH TTCF-6 hot-fluid flusher from MDC ($10,000) to bundle with my rebuild. Same tool Mike runs daily. Same one the dealers use. Yours forever.

I do not have a flusher and will not buy one. I accept that my rebuild warranty is VOID. Job still done, no warranty.

✍️ tap to sign

📥 Current ship-in queue

#SI-104 · '08 Ford F-150 5.4L · 4R70W rebuild BUILDING

Customer: Tom Reeder (Statesville NC) · Waiver signed · Flusher: owns Mityvac (verified photo) · Fluid: Mercon LV (5 qt) · Ship date: Jun 11

#SI-105 · '16 BMW 335i · ZF 8HP service + valve body INBOUND

Customer: Marcus G. (already on file — 8HP from Feb 18) · Waiver signed · Flusher: BUYING (+$10K GTECH TTCF-6 affiliate) · Tracking: 1Z9999... · ETA Jun 9

#SI-106 · '12 Chevy Silverado 1500 · 6L80 rebuild WAIVER PENDING

Customer: Jenkins Auto Salvage (Knoxville TN) · Awaiting signed waiver · Reminder sent 2 days ago